Glass clips are made of solid brass with inside dimensions of 3/8", 1/2" and 5/8". Mounting faces are machined for mounting to 2" diameter tube, or to flat surfaces. Finishes are satin or polished brass, chrome or satin stainless steel.

Attractive sneezeguards in a variety of designs and materials can be quickly fabricated to meet your specific requirements. Units can be manufactured using solid brass, stainless steel, chrome or custom paint finishes. Basic designs as shown below are available in standard sizes. Contact BRASCON for specifications on these units. Units provided with or without glass.

Complete racks with tube frames available from stock in three popular styles - ball, flush and square, and in 16" and 23" glass holder lengths. Units are built with overall lengths and leg lengths as required. Lacquered brass or chrome available from stock. Stainless steel, stainless steel finish and other special finishes available. We also manufacture to your own design specifications.

When designing your stemware system, the height from the floor to the glass sliders (rods) is important. Height from floor to sliders should be approximately 78" but not over 80", (these dimensions assume staff of average height). BRASCON will fabricate your rack to the appropriate overall height (minimum 5 1/2"). Sliders come in 2 standard lengths of 16" and 23". Illustrated below is typical GRB style ball rack. Distance to the outside of flanges is 19" for 16" sliders and 26" for 23" sliders. Flanges are 3" in diameter.

Available from stock in 1 1/2" and 2" tube, standard glass heights of 12" and 15", lacquered brass finish, mirror chrome or satin stainless steel finish and your choice of ball top, dome top (both shown) or flat top. Configurations include ends, corners and middles. Request price list for catalogue numbers and prices.

This attractive menu stand features a large 17 1/2" x 233/4" display box, 2" main post and heavy cast iron base with solid brass cover. This unit is fabricated in solid brass with a clear lacquer finish. Menu door locks by key. Overall height 44 1/2".

Two styles of solid brass carpet holders are available. Large bracket for 5/8" rod with lift up cap to allow rod removal for cleaning of carpet. Specify left or right. Smaller bracket for 3/8" rod which is permanently installed. Rods sold separately - specify length.

Stylish contemporary rails are available in 3 basic designs as shown below. Available in brass, chrome and stainless steel and tube sizes of 1 1/2", 2" or 2 1/2". Built to customers specifications.

Service rails come complete with two welded flanges for maximum strength. Rails available in brass, chrome and stainless steel. Two styles using 2" round tube are available - square design (pictured) and rounded design.