 |
 |
 |
|
|
|
Turnstiles
are an economical and effective means of controlling traffic
flow in one direction. The BRASCON Series III turnstile incorporates
the standard 4 arm industry design with a proven one way locking
mechanism. Series III units include an 11 gauge - 3 1/2"
main post, 1 1/4" - 16 gauge arms, all in a hard chrome
finish (custom powder coat optional). Operating direction
can be easily reversed by field personnel.
Specify a SERIES III SAFETY TURNSTILE and have the benefit
of a quick release turnstile that will eliminate the danger
associated with children playing around these units. Look
for the red emergency release cap that identifies the safety
turnstile available.
|
 |
|
Counter
Clockwise Turnstile Series III
|
TS3CCW
|
|
Clockwise
Turnstile Series III
|
TS3CW
|
|
Safety
Turnstile
|
TS3SAF
|
|
|
|
|
Illustration
Above
|
|
1-
High Post w/Header Arm
|
TP2HH
|
|
1-
Barrier Arm c/w 2 Horiz. Fittings
|
TR2BA
|
|
2-
Curved Section
|
TR2CS
|
|
2-
Double Line End Post
|
TP2DLE
|
|
1-
Safety Turnstile
|
TS3SAF
|
|
The
picture shown below illustrates all of the components required
for a standard turnstile installation. The high header post
(TR2HH) and the barrier post (TR2BA) restrict flow in the
reverse direction. The two curved horizontal rails (TR2CS)
are mounted to two double line end posts (TP2DLE) to complete
the turnstile installation. Horizontal fittings can attach
to the posts on either side to extend the railing system.
|
|
BRASCON
is proud to introduce this attractive and versatile security
partition. The main posts, horizontal rails, top cap and mounting
flanges are all adaptations of the popular double line railing
system and can easily connect to and continue the theme of
the basic railing system. Bottom panels are scuff resistance
7/16" melamine in a variety of standard colours and the
top panels are 3/8" clear plexiglass or semi transparent
thermoclear plastic panels. Colour co-ordinate the bottom
panels or add custom graphics for that special touch.
|
Partition
Corner Post
|
TP9C
|
|
Partition
End Post
|
TP9E
|
|
Partition
Middle Post
|
TP9M
|
|
Partition
Bottom Horiz. Rail
|
TR9-B4
|
|
Partition
Top Horiz. Rail
|
TR9-T4
|
|
7/16"
Melamine Lower Panel
|
TR9M
|
|
3/8"
Plexiglass Upper Panel
|
TR9PG
|
|
3/8"
Thermo Clear Upper Panel
|
TR9TC
|
|
|
 |
|
Expensive
refrigeration units and displays should be protected from
damage caused by shopping carts, pallets, trucks, etc. BRASCON
case protectors offer an attractive design with concealed
mounting brackets. Available in 3 heights in bright chrome,
polished stainless steel and mirror stainless steel. Require
3 of 3/8" x 3" wedge anchors (sold separately).
|
|
|
12"
Stainless Steel
|
TB2CP12SS
|
|
16"
Stainless Steel
|
TB2CP16SS
|
|
24"
Stainless Steel
|
TB2CP24SS
|
|
12"
Chrome
|
TB2CP12C
|
|
16"
Chrome
|
TB2CP16C
|
|
24"
Chrome
|
TB2CP24C
|
|
 |
| Customize
your door guards to meet your own particular requirements. Available
in chrome, stainless steel or painted finishes and in 1 1/2",
2" or 2 1/2" tube sizes. Styles include the basic
arch design shown at right, or extend to the door frame with
a mullian adapter to allow mounting and wiring of remote handicap
release button. Mounting options include flange and cover, or
core into floor and cement.
|
 |
| 1
1/2" |
0 |
Mullion
Adapter |
Cored
Inst |
Stainless
Steel |
TG150EC |
| 1
1/2" |
0 |
ArchDesign |
Cored
Inst |
Stainless
Steel |
TG150AC |
| 1
1/2" |
0
|
Mullion
Adapter |
Flanged |
Stainless
Steel |
TG150EF |
| 1
1/2" |
0 |
Arch
Design |
Flanged |
Stainless
Steel |
TG150AF |
| 2" |
0 |
Arch
Design |
Cored
Inst |
Stainless
Steel |
TG200AC |
| 2" |
0 |
Arch
Design |
Flanged |
Stainless
Steel |
TG200AF |
|
|
Minimize
door guard or railing damage with 5" dia. x 1 3/4"
hard rubber protective wheel. Mounts to post at specified
height.
| 1
1/2" Hole |
TG150RW |
| 2"
Hole |
TG200RW |
| 2
1/4" Hole |
TG225RW |
|
 |
|
Maximum
security provided by these full size cabinet - high security
3 am turnstiles. Available in all stainless steel shown at
right, or with powder coat base and stainless top and arms
shown. Available in Manual or electric, optional features
include portable mounting base and rail, electronic counter,
and card reader, coin or token activation.
Cabinet dimensions: 38" high x 28" wide x 7"
deep
Passage width: 19"
TS4-3ASS - Stainless Steel Manual
TS4-3ASSE - Stainless Steel Electric
|
 |
|
 |
- One
way traffic control
- Attractuve
- Versatile
The
ENTECH 2000 entrance device by BRASCON is
a versatile, moderately priced entrance control alternative
that has been designed to provide easy access for the disabled,
shopping carts, strollers as well as the general public.
The unit is comprised of a series of mechanically linked
barrier arms that pivot away from the patron's path of travel
upon passage, but are locked in the closed position to those
who try to exit through the unit. Card readers and scanners
can be adapted for 24VDC activation. See dimensions and
configurations blow.
|
| The
optional MODULE RELEASE feature shown at the right allows
the barriers to be released and dropped to a vertical position
in the case of emergency. This feature can also be used to allow
exiting patrons at the end of events, movement of product, or
the returning of shopping carts. |
Optional
Module Released |
| Illustrated
are 4 basic configurations, with dimensions shown at right.
Models A & D meet entrance width requirements of 32"
for handicap access and emergency swing down exit widths of
36" to meet fire code requirements. Check with local building
authorities to confirm your specific code requirements. Other
configurations with various openings also available. |
|
Fig
|
Part
#
|
Fixed
Module
|
Releasable
Module
|
Overall
Width
|
Regular
Opening
|
Released
Opening
|
| A |
NED
284X34S |
48.25" |
54.25" |
42.75" |
34" |
36" |
| B |
NED
360X24S |
60.25" |
66.25" |
32.75" |
24" |
26" |
| C |
NED
372X30S |
72.25" |
78.25" |
38.75" |
30" |
32" |
| D |
NED
380X34S |
80.25" |
86.25" |
42.75" |
34" |
36" |
|
TOP
OF PAGE
|
|
